ALEXAPURE WATER FILTERATION SYSTEM WITH (1) EXTRA REPLACMENT FILTER


ALEXAPURE WATER FILTERATION SYSTEM WITH (1) EXTRA REPLACMENT FILTER
Item Number: P-AWFS2
  Be the first to review this item
$375.00
Quantity 



Detailed Description

Transform water from virtually any freshwater source into safer water with the Alexapure Pro® Water Filtration System.  Safe water you can drink without worry

  • Reduces 206 contaminants** commonly found in drinking water including:
    • Bacteria (> 99.9999%)
    • Chlorine (> 99.9%)
    • Fluoride (> 97%)
    • Pesticides (> 95%)
    • Pharmaceuticals (> 95%)
    • Viruses (> 99.99%)
    • Heavy metals
    • Lead
  • Click here to see the test results!

    What’s Inside

    • (2) Alexapure® gravity block filter with hybrid ceramic shell
    • (1) non-slip rubber base ring
    • (1) stainless steel upper chamber
    • (1) stainless steel lower chamber
    • (1) stainless steel lid
    • (1) stainless steel spigot assembly
    • (1) knob assembly
    • (3) food-grade nitrile and silicone rubber plugs
    • (1) set of instructions

     

    Features

    • Durable stainless steel construction
    • Easy assembly and maintenance
    • Reduces 206 contaminants** commonly found in drinking water
    • Verified* filtration capacity of 200 gallons
    • Water storage capacity of 2 1/4 gallons
    • Convenient stainless steel spigot for instant access to filtered water
    • 10-inch upper chamber
    • 10 1/8-inch lower chamber
    • 21 1/2-inch assembled height including top handle
    • Weighs less than 8 pounds

     

    Extra Replacement Filter Description:

    Each Alexapure Pro Water Filtration System accomodates up to four filters. The water flow rate increases when more filters are added, without sacrificing water quality.

    When a drastic change in water flow rate is noticed, simply replace your Alexapure Pro Water Filtration System's filter with an Alexapure Pro Genuine Replacement Filter.

    Features

    • Proprietary gravity block with ionic absorption technology
    • Silver-infused ceramic outer shell
    • Verified* filtration capacity of 200 gallons
    • Weighs less than 2 pounds
    • Ready to use right out of the box
    • No priming necessary
    • Made in the USA

     

    What’s Included

    • Alexapure Pro Genuine Replacement Filter
    • Installation hardware

     

    Replacing Your Alexapure Pro® Genuine Replacement Filter

    1. Remove the lid from the upper chamber.
    2. Remove the empty upper chamber, keeping the old filter steady with one hand.
    3. Reach beneath the filter and remove the wing nut holding the unit in place.
    4. Slide the filter out, then discard it.
    5. Open the package containing the new filter.
    6. Unscrew the wing nut, leaving the washer in place.
    7. Thread the stem of the new filter through one of the four holes on the bottom of the upper chamber. Ensure the filter is held straight.
    8. Secure the filter beneath with the wing nut.
    9. Replace the upper chamber and use!

     

    **Chlorine reduction claims are not performance tested beyond 200 gallons. Additional performance claims are based on independent laboratory and manufacturer’s internal test data. Actual performance is dependent on influent water quality, flow rates, system design, and application. Results may vary.
    This system has been tested for the reduction of the substances listed in the product test data sheets. The concentration of the indicated substances in water entering the system was reduced to a concentration less than equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53. Minimum substance reductions are listed on the provided test data sheets for testing up to 200 gallons.
    System and installation to comply with state and local laws and regulations. Do not use with water that is microbiologically unsafe or unknown quality without adequate testing and/or disinfection before or after the system. Manufactured from NSF/ANSI standard 61 and California Prop 65 Compliant certified coconut shell carbon and raw materials.
    For the best results, store replacement filters at temperatures above 35°F. Keep the filter moist and from drying out at all times for maximum filtration capacity.
    PERFORMANCE:  Performance claims are based on independent lab results and manufacturer’s internal test data*. Actual performance is dependent on influent water quality, flow rates, system design and applications. Your results may vary. Performance claims are based on a complete system, including a filter and housing. This filter must be operated according to the system’s specifications to deliver the claimed performance. It is essential to follow operational, maintenance, and filter replacement requirements as directed for each application for this filter and system to perform correctly. Read the Manufacturer’s Performance Data Sheet accompanying the system and change the filter as suggested. The contaminants or other substances removed or reduced by this water filter are not necessarily in all users’ water.
    WARRANTY:  LIMITED LIABILITY: Alexapure, LLC makes no warranties of any kind, expressed or implied, statutory, or otherwise, and expressly disclaims all warranties of every kind, concerning the product, including, without limitation, warranties of merchantability and fitness for a particular purpose, except that this product should be capable of performing as described in this product’s data sheet. Alexapure’s obligation shall be limited solely to the refund of the purchase price or replacement of the product proven defective, in Alexapure’s sole discretion. Determination of suitability of this product for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. Use of this product constitutes Buyer’s acceptance of this Limited Liability.